The JL-208-IP67 provides electrical continuity and protection for a compatible twist-lock photocontrol receptacle when a photocontrol is not installed or is removed for maintenance. The manufacturer datasheet specifies IP67 protection and an ANSI C136.10 interface.
| Modelo | JL-208-IP67 |
|---|---|
| Rated load | 7200 W tungsten; 7200 VA ballast |
| Voltage range | 0–480 VAC |
| Frecuencia nominal | 50/60 Hz |
| Ambient temperature | −40°C to +70°C |
| Relative humidity | 96%, as specified in the datasheet |
| Enclosure material | PC estabilizado a los rayos UV |
| Base material | High-impact PBT |
| Protección contra la entrada | IP67 |
| Interface reference | Norma ANSI C136.10 |
Disconnect power before installation. Wire the mating receptacle according to the manufacturer wiring diagram. Align and push the cap into the receptacle, then rotate clockwise to lock. Installation must be completed by qualified personnel.
Confirm the mating receptacle, gasket and completed assembly meet the required sealing conditions. The cap rating alone does not establish the ingress-protection rating of every receptacle or luminaire combination. The listed tungsten and ballast loads should not be treated as an independently verified LED-driver inrush rating.
This shorting cap maintains electrical continuity; it does not provide dusk-to-dawn switching or dimming. For model-specific certification documents and compatibility confirmation, send your receptacle and application requirements with your inquiry.
Explore shorting caps o request a compatibility review and quotation.
No te preocupes, nunca te enviaremos spam.
Te enviaremos lo último Manual del sistema de control de iluminación inteligente basado en la nube
