


Il fotocontrollo JL-245CN può essere applicato a applicazione di controllo indipendente O applicazione di controllo del sistema, come strade, fiere, scuole, centri commerciali, supermercati, fabbriche, parchi e così via.
Questo prodotto è costituito da un Comunicazione NB-IoT modulo per consentirne la gestione remota tramite un sistema di gestione IoT intelligente.

| Product type | Smart IoT dimming photocontrol (twist-lock controller), ANSI C136.41 interface |
|---|---|
| Rated voltage | 120–277 VAC; applicable range 105–305 VAC |
| Frequenza nominale | 50/60 Hz |
| Uscita dimmer | 0–10 VDC |
| Uplink communication | NB-IoT, SIM card slot provided |
| Spectral acquisition | 350–1100 nm, peak wavelength 590 nm |
| Rated loading | 1000 W tungsten; 1000 VA ballast; 8 A at 120 VAC / 5 A at 208–277 VAC electronic ballast |
| Operating levels | Turn-on below 100 lx, turn-off above 150 lx (factory setting, adjustable per request) |
| Consumo energetico | 1.2 W static, 2.4 W dynamic |
| Ambient temperature | da −40 °C a +70 °C |
| Relative humidity | 96% |
| Fail mode | Fail-On |
| Housing material | PC |
| Protezione contro le sovratensioni | 6 kV / 3 kA, differential mode |
| Protezione dall'ingresso | IP67 |
| Factory setting | Remote control + adaptive mode |
| EMC standards declared | IEC 61000-4-2/-3/-4/-5/-6/-11, IEC 61000-3-2, GB/T 17743-2017, GB/T 2423.10-2008, UL94 V-0 |
Values as printed in the JL-245CN EN 2307V6 datasheet. The datasheet carries no certificate number in its certification row; this table is a manufacturer declaration, not a certificate.

L'interfaccia del prodotto stesso è stata progettata a prova di errore, basta stringere il fotocontrollo
direttamente alla base girevole/fissa, come mostrato nella figura in senso orario dopo l'inserimento.

The product description identifies an NB-IoT communication module. Confirm the supported cellular bands, SIM or service requirements, coverage and management-platform compatibility for the destination market before ordering.
Do not assume interchangeability. JL-245CN is described as NB-IoT, while other models may use different protocols. Confirm the exact controller, commissioning method and system integration requirements.
Confirm the supply voltage, ANSI C136.41 receptacle/contact arrangement, 0-10V LED driver interface, load and inrush rating, seals and specified outdoor configuration using the current JL-245CN documentation.
See controlli di illuminazione intelligenti, NEMA receptacles and accessories, E selection and installation FAQs.
Scrivici su WhatsApp
Non preoccuparti, non ti invieremo mai spam.
Ti invieremo l'ultimo manuale del sistema di controllo dell'illuminazione intelligente basato su cloud