JL-245CZ Smart IoT Dimming Photocontrol consists a Zigbee Communication Module, Use with JL-246CG (master control)

Product Summary

JL-245CZ photocontrol can apply to independent control application or system control application, such as roads, exhibitions, schools, shopping malls, supermarkets, factories, parks and so on. This product consists a Zigbee communication module to allow its remoted with a smart IoT management system.

Features

• ANSI C136.41 Twist-lock
• 0~10V Dimming
• Surge protection level: 6KV/3KA differential mode
• Sandwich cover for Long Life
• Multi-Volts Application75
• IP67 Ready
• IR-filtered Phototransistor

Specifications

Installation

The interface of the product itself has been mistake-proof designed, just tighten the photocontrol

directly to the rotatable/fixed base, as shown in Figure clockwise after insertion.

• Hot-swappable
• Users can input the photocontrol ID information to the smart lighting management system through WEB interface or by scanning QR code with its specific WeChat “UM9900 Smart Light Pole” public account.

Initial Testing

• It is normal for the photocontrol to take several seconds to turn off when first installed.
• To test “turn on” during daytime, cover its eye with black tape or other opaque material.
• Do not cover with finger because light traveling through fingers may be great enough to keep the switch open.
• Test will take approximately 2 minutes.