JL-700M

Class zhaga Book 18 lock socket for 0-10v dimming scheme

Product Summary Similar to zhaga Book 18 standard, JL-700M socket is suitable for 0-10V dimming scheme,which is convenient for developing standard equipment suitable for road lighting, regional lighting or residential lighting.According to the equipment arrangement, these equipment can adopt monitoring, communication, control and other functions based on 0-10V dimming.Benefits

• similar to zhaga Book 18 standard interface, used for 0-10V dimming scheme
• small size, suitable for more lamps
• advanced sealing, IP66 can be achieved without installing screws
• expandable solution: it is allowed to use Φ 40-80mm expansion controller with the same connection interface in the central management system
• flexible installation position, which can be installed on the top / bottom / side of the lamp
• integrated single gasket to seal lamps and modules to minimize assembly time

Applications

• street and area lighting
• outdoor lighting – wall components – parking – Walkways
• light sensing control
• central management system communication
• other sensor modules, such as motion detection, remote operation

Features Contact rating: 1.5A, 30VDC (typical 24V)Meet 10kV common mode surge test requirementsConfirm replacement conditions in the exact assembly instructionsQuadrupole contactRated impulse voltage: 0.8kvInsulation protection: Class IITemperature range: – 40 to 70 ° CBefore installing lamps, the main power supply should be turned offSpecificationsConductor specification: confirm the applicable UL record for the selected #20 wire grade and configuration.Wiring diagram

JL-700M key parameters

Values as printed in the JL-700M EN 2411V6 datasheet. The interface is described as similar to Zhaga Book-18, which is a mechanical interface statement only: it does not by itself prove Zhaga Book-18 or Zhaga-D4i certification. The datasheet certification row carries no certificate number.

JL-700M Selection FAQs

Does this socket establish Zhaga-D4i compatibility?

No. The description presents JL-700M as a socket similar to the Zhaga Book 18 interface for a 0-10V dimming scheme. Confirm the exact mating dimensions, contact assignment, controller and driver; do not infer DALI, D4i or certification from mechanical similarity.

What electrical limits should I check?

The description states a 1.5A, 30VDC contact rating, typically 24V. Confirm the complete wiring diagram and power/signal assignments for the selected assembly; a contact rating does not establish compatibility with a mains-powered controller.

How should sealing and replacement be specified?

Confirm the gasket, luminaire opening, mounting surface and complete IP66 assembly documentation. Follow the installation instructions and isolate the main supply; any permitted live replacement must be confirmed for the exact assembly by a qualified installer.

See Zhaga socket selection, Zhaga controllers and components, et selection and installation FAQs.