JL-700M Class zhaga Book 18 lock socket for 0-10v dimming scheme

Name: JL-700M Class zhaga Book 18 lock socket for 0-10v dimming scheme
Brand: Long-Join
SKU: JL-700M

Category Zhaga Book 18 Components

JL-700M Class zhaga Book 18 lock socket for 0-10v dimming scheme - Image 2

JL-700M Class zhaga Book 18 lock socket for 0-10v dimming scheme - Image 3

Product Details:

JL-700M

Class zhaga Book 18 lock socket for 0-10v dimming scheme

Product Summary

Similar to zhaga Book 18 standard, JL-700M socket is suitable for 0-10V dimming scheme,

which is convenient for developing standard equipment suitable for road lighting, regional lighting or residential lighting.

According to the equipment arrangement, these equipment can adopt monitoring, communication, control and other functions based on 0-10V dimming.

Benefits

similar to zhaga Book 18 standard interface, used for 0-10V dimming scheme
small size, suitable for more lamps
advanced sealing, IP66 can be achieved without installing screws
expandable solution: it is allowed to use Φ 40-80mm expansion controller with the same connection interface in the central management system
flexible installation position, which can be installed on the top / bottom / side of the lamp
integrated single gasket to seal lamps and modules to minimize assembly time

Applications

street and area lighting
outdoor lighting – wall components – parking – Walkways
light sensing control
central management system communication
other sensor modules, such as motion detection, remote operation

Features

Contact rating: 1.5A, 30VDC (typical 24V)

Meet 10kV common mode surge test requirements

Confirm replacement conditions in the exact assembly instructions

Quadrupole contact

Rated impulse voltage: 0.8kv

Insulation protection: Class II

Temperature range: – 40 to 70 ° C

Before installing lamps, the main power supply should be turned off

Specifications

Conductor specification: confirm the applicable UL record for the selected #20 wire grade and configuration.

Wiring diagram

JL-700M key parameters

JL-700M — transcribed from datasheet JL-700M EN 2411V6
Product type	Zhaga Book-18 style lock socket (receptacle) for 0–10 V dimming — not a controller
Contact rating	1.5 A, 30 VDC (typical 24 V)
Rated impulse voltage	0.8 kV
Insulation protection	Class II
Contact configuration	Four-pole contact, hot pluggable
Surge	Meets 10 kV common-mode surge test requirement
Ingress protection	IP66 achievable without installing screws
Ambient temperature	−40 °C to +70 °C
Relative humidity	96%
Wiring	AWM 1015 18/20/22 AWG 105 °C; AWM 1007 18/20/22 AWG 80 °C; #20 conductor is UL listed
Port definition	1 RED 24 VDC; 2 BLACK 0–10 V− / GND; 3 VIOLET 0–10 V+; 4 YELLOW general I/O
Mating controller	Φ 40–80 mm expansion controller using the same connection interface

Values as printed in the JL-700M EN 2411V6 datasheet. The interface is described as similar to Zhaga Book-18, which is a mechanical interface statement only: it does not by itself prove Zhaga Book-18 or Zhaga-D4i certification. The datasheet certification row carries no certificate number.

JL-700M Selection FAQs

Does this socket establish Zhaga-D4i compatibility?

No. The description presents JL-700M as a socket similar to the Zhaga Book 18 interface for a 0-10V dimming scheme. Confirm the exact mating dimensions, contact assignment, controller and driver; do not infer DALI, D4i or certification from mechanical similarity.

What electrical limits should I check?

The description states a 1.5A, 30VDC contact rating, typically 24V. Confirm the complete wiring diagram and power/signal assignments for the selected assembly; a contact rating does not establish compatibility with a mains-powered controller.

How should sealing and replacement be specified?

Confirm the gasket, luminaire opening, mounting surface and complete IP66 assembly documentation. Follow the installation instructions and isolate the main supply; any permitted live replacement must be confirmed for the exact assembly by a qualified installer.

See Zhaga socket selection, Zhaga controllers and components, and selection and installation FAQs.