Corrente di alimentazione confermata: 35 mA a 12 V CC o 25 mA a 24 V CC. Questi valori sostituiscono i dati di consumo energetico contrastanti presenti nelle tabelle dei parametri precedenti. Verificare la capacità totale dell'alimentatore o dell'alimentatore ausiliario per l'installazione selezionata.

JL-712B2A2 Selection FAQs

Is JL-712B2A2 a Casambi controller or a generic Bluetooth Mesh controller?

The product description identifies Casambi Bluetooth mesh communication and configuration through the Casambi app. Confirm the supplied firmware, commissioning procedure and gateway requirements for remote control; compatibility should not be assumed for a generic Bluetooth Mesh system.

Does the Zhaga interface mean this controller uses DALI dimming?

This model lists 0-10V dimming and a 12-24VDC supply. Match the socket pin assignment, auxiliary power supply and LED driver control input. The connector description alone does not establish DALI or D4i compatibility.

What should be checked before installation outdoors?

Confirm the current sensing coverage diagram, installation height, app settings and IP66 assembly requirements for the selected controller and socket. Request current model-specific certification records for the listed CE, Zhaga and RoHS claims before specifying the product.

Related guidance: Controllori e componenti Zhaga | Smart lighting controls | Selection and installation FAQs

JL-712B2A2 0-10V dimmerabile Zhaga Book-18 Controller Zhaga Supporta la rete di comunicazione Casambi Bluetooth Mesh, sensori di rilevamento della luce + sensori di rilevamento a microonde

Riepilogo del prodotto

IL Modello JL-712B2A2 Il prodotto del controller di luce è un controller di luce di tipo latch intelligente sviluppato sulla base di Standard di interfaccia Zhaga Book-18Utilizza una combinazione di sensori di rilevamento della luce e delle microonde, può produrre 0-10 V segnali di oscuramento e supporto Rete di comunicazione mesh Bluetooth CasambiPuò essere controllato da Bluetooth in campo vicino, oppure essere controllato da remoto tramite gateway Bluetooth. È possibile configurare parametri e scenari utilizzando Casambi APP Questo controller di illuminazione è adatto per scenari di illuminazione quali strade, prati, cortili, parchi, parcheggi, fabbriche, magazzini, ecc.

Caratteristiche

• Alimentazione 12-24 V CC, basso consumo energetico
• Standard di interfaccia Zhaga Book-18
• Modalità di oscuramento 0-10 V
• Regolazione dinamica della frequenza delle microonde per evitare interferenze reciproche durante l'installazione densa
• Dimensioni compatte Φ 50,4 * 35 mm, adatte per l'installazione su vari apparecchi di illuminazione
• Sensibilità alla luce + microonde, illuminazione su richiesta, maggiore efficienza energetica
• Sensore fotosensibile filtrato dalla luce visibile
• Forno a microonde ad alte prestazioni, con altezza di sospensione di 15 metri e raggio di induzione ≥ 10 metri
• CASAMBI BLE MESH
• IP66

Parametri

Parameter notes for this datasheet edition

Datasheet 2406V1 prints both the supply current (35 mA at 12 VDC, 25 mA at 24 VDC) and power-dissipation figures of <0.385 W (12 V) and <0.55 W (24 V). Use the confirmed supply current above as the selection basis. The power-dissipation figures are a datasheet statement, not a measured consumption value, and this page does not repeat them as a selection figure.

Pin assignment

Pins 3 and 4 both output the dimming positive simultaneously. When wiring the socket, either one can be connected to the driver, or both can be connected at the same time. Any unused pin should be insulated. The mating socket determines the conductor colours: in the 700 series socket arrangement shown in the wiring diagram below, brown carries 12–24 VDC, grey carries GND/DIM−, and black or blue carries 0–10 V+.

Recommended socket models

The socket is a separate item and is not supplied with the controller. The controller and the socket are separate scopes of supply: this page covers the controller only. JL-700S and JL-700T have no dedicated page on this site at present — ask us for their drawings and lead time.

Supply scope and what to confirm before ordering

Datasheet download: JL-712B2A2 English datasheet 2406V1 (PDF) — manufacturer original, 9 pages, including dimensions, pin assignment and installation precautions.

Schema elettrico dell'induzione a microonde – installazione a 15 metri di altezza

Dimensione

Schema elettrico

Nota: è possibile selezionare la linea nera o quella blu, e collegarle anche in parallelo contemporaneamente.

Installazione

L'interfaccia del prodotto stesso è stata progettata a prova di errore, per l'installazione è sufficiente stringere il controller direttamente alla base girevole, come mostrato nella figura, in senso orario dopo l'inserimento.

Wiring and installation notes

Condensed from datasheet 2406V1, pages 8–9. These are the conditions that most often decide whether the product works in a given luminaire.

1. Auxiliary and dimming negatives. If the negative pole of the driver’s auxiliary supply is separate from the negative pole of the dimming interface, short them together and connect to controller pin 2.
2. Lamp types. The controller is intended mainly for LED luminaires. Tungsten-filament lamps and other broad-spectrum lamps may switch off again after switching on.
3. The controller cannot interrupt AC. It has no ability to cut the driver’s AC supply, so the driver must draw close to 0 mA at minimum dimming. Otherwise the luminaire may not turn off completely.
4. Dimming signal only. The controller outputs a dimming signal only; it does not carry the power load of the driver or the light source. Do not use it to size the load.
5. Do not block the light window with fingers when testing. Light can pass between fingers and the lamp may fail to switch.
6. Keep metal out of the microwave path. Metal obstructions in the detection angle seriously reduce sensing performance.
7. Outdoor false triggering. Rain and moving foliage can trigger the sensor outdoors.
8. Avoid pendant mounting. Hanging installation lets the product swing and can cause false triggering.
9. Detection varies with site conditions. Sensing performance depends on the installation environment, the luminaire, and the size and speed of the target, so the actual detection range may differ from the chart.
10. Microwave warm-up. Motion detection can only be triggered up to 5 seconds after the microwave module is powered on.

Detection coverage: datasheet 2406V1 gives a maximum mounting height of 15 m and an induction radius of ≥10 m. The coverage chart plotted for 15 m mounting is not circular — the plotted radius is narrowest on the 60°–120° side and widest around 180°–210°. Plan the mounting position against the chart, not against a single radius figure.