JL-700K4/K5 socket and accessory scope

JL-700K4 and JL-700K5 are socket mounting configurations with brackets. The socket contact assignment shown below is 24VDC/DALI. This page also includes examples of controllers, power supplies and conversion accessories. The 85–305VAC input, 0–10V conversion output and associated power-supply features in those examples must not be applied as electrical ratings of the bare socket.

Before ordering, request the exact socket drawing, accessory part number, wiring diagram and applicable certification record. A certification statement for a power supply or controller does not establish certification of every socket or complete luminaire assembly.

JL-700K4/K5 Selection FAQs

How do I choose the mounting configuration?

Confirm the exact K4 or K5 bracket, retainer plate, washer, luminaire opening and mounting dimensions against the drawing. The combined page covers multiple configurations; do not assume they have identical mounting details.

Does the socket supply every smart-lighting function?

No. The controller and driver determine sensing, dimming and communication. Confirm the 24VDC/DALI contact assignment shown on this page and the complete wiring instructions; a shared mounting interface alone does not establish system compatibility.

What establishes sealing and certification?

Confirm the selected gasket, bracket, luminaire surface and controller for the complete IP66 assembly. Request the applicable Zhaga or conformity records for the exact socket and configuration rather than inferring certification from the interface description.

See Zhaga socket selection, Zhaga controllers and components, and selection and installation FAQs.

Product descriptions

Features

• Standardized interface defined in Zhaga Book 18
• Compact size allowing greater flexibility in luminaire design
• Advanced sealing to achieve IP66 with no mounting screws
• Scalable solution allows use of Ø40mm photocell and Ø80mm LEX-M in a central management system with the same connection interface

• Flexible mounting position, upwards, downwards and sideways facing
• Integrated single gasket that seals to both luminaire and module that minimizes assembling time

Specifications

 

 

Lead Definition Pin 1 (brown): 24VDC   Pin 2 (gray): DALI-/GND   Pin 3 (blue): DALI+   Pin 4 (black): reserved I/0 port

 

Features: • Comply with ZHAGA BOOK18 standard • IP66 (cooperate with our ZHAGA light controller) • Support top surface installation/side installation/upside-down installation • Small size, suitable for installation on all kinds of lamps • The cost is much lower than choosing a dimming driver solution with secondary voltage output • AC wide voltage input (85~305VAC) • No-load power consumption ≤0.12W • Comprehensive protection: overvoltage protection/undervoltage protection/overcurrent protection/short circuit protection/ Open circuit protection/over temperature protection • 0~10V dimming signal switch output • CLASS II power supply • Passed RoHs and UL certification

 

 

 

 

• The default line length is 152.4mm, and the length can be customized • The stripping length is 10mm by default, the insulation layer is reserved, and the length can be customized • AC wire gauge (black wire, white wire): 18AWG /AWM1015, 2.9mm outside diameter including insulation • Signal wire gauge (purple wire, gray wire): 20AWG/AWM1015, 2.6mm outside diameter including insulation

 

 

Note: Compared with the NEMA standard light controller, the ZHAGA light controller has a flexible installation position and a smaller volume, which makes the lamp more beautiful. The installation position also reflects the different functions of the ZHAGA light controller. (Light control, microwave, infrared)

 

 

Note:In this project case, the combination of zhaga socket and protect cover/ shorting cap can be equivalent to the pre-installation project of NEMA standard smart street light. Retrofit and upgrade traditional street lights.Compared with the street lamp project of the NEMA socket, the zhaga socket has a more beautiful design and saves costs.

 

 

 

Note: We provide different sizes of zhaga light control covers and bases for you to design your own controller.

 

 

 

Note: This zhaga light control has the same function as the traditional nema street light controller. It controls the switch of the street light through the brightness of the ambient light and reduces the cost.

 

 

Note: This zhaga product design is mainly applied to the principle of infrared micro- wave induction. Through infrared induction of moving objects (cars or people in mo- tion), street light switches are controlled, which not only satisfies lighting needs but also saves electricity costs.

 

 

Note: This series of light controller products are based on the ZHAGA BOOK18 inter-face standard development of smart Hui type rotary lock light controller, adopts light sensor + microwave mobile combined sensor, can output DALI Dimming signal. The light controller is suitable for roads, lawns, courtyards, parks, parking lots, industrial Lighting scenes such as mines.

 

 

Note: In this project case combination, choose the zhaga socket to match the zhaga series finished light control. According to the needs of the actual project, choose the nature of the controller (light control, smart or infrared control) to choose the right product. Compared with light control and intelligent control, infrared control is generally suitable for indoors, such as large factories and underground garages. Or it can be combined with intelligent light control to realize the intelligentization of urban lighting.