JL-246CG Zigbee/LTE Smart IoT Dimming Photocontrol and Gateway for JL-245CZ

JL-246CG Zigbee/LTE Smart IoT Dimming Photocontrol and Gateway for JL-245CZ - Imagem 3

JL-246CG Zigbee/LTE Smart IoT Dimming Photocontrol and Gateway for JL-245CZ - Imagem 4

Detalhes do produto:

JL-246CG key specifications: rated input 120–277VAC; operating range 105–305VAC; frequency 50/60Hz; dimming output 0–10VDC; LTE Cat.1 uplink and Zigbee downlink. The existing specification chart lists Fail-On operation, an ambient range of −40°C to +70°C and IP54/IP65/IP67 configurations. Confirm the ordered sealing configuration, LED driver compatibility and destination-market cellular bands. Certification logos in the chart require the applicable model-specific listing, declaration and supporting reports; they do not establish approval of every supplied configuration.

JL-246CG Zigbee/LTE Smart IoT Dimming Photocontrol and Gateway for JL-245CZ

Resumo do produto

O fotocontrolador JL-246CG pode ser aplicado em sistemas de controle independentes ou em sistemas de controle, como em estradas, exposições, escolas, shoppings, supermercados, fábricas, parques e outros locais. Este produto possui um módulo de comunicação Zigbee e um módulo de comunicação LTE, permitindo o controle remoto do grupo Zigbee por meio de um sistema inteligente de gerenciamento de IoT.

Características

ANSI C136.41 Trava giratória
Escurecimento de 0 a 10 V
Nível de proteção contra surtos: modo diferencial 6KV/3KA
Capa protetora para sanduíche de longa duração.
Aplicação Multivoltagem
Confirm the IP67 configuration and complete assembly documentation
Fototransistor com filtro IR

Especificações

JL-246CG key parameters

JL-246CG — transcribed from datasheet JL-246CG EN 2306V6
Modelo	JL-246CG
Product type	Smart IoT dimming photocontrol with LTE gateway / collector function; ANSI C136.41 twist-lock
Rated voltage	120–277 VAC
Faixa de tensão aplicável	105–305 VAC
Frequência nominal	50/60 Hz
Saída de intensidade	0–10 VDC
Wireless communication, uplink	LTE Cat.1
Wireless communication, downlink	Zigbee
Faixa de aquisição espectral	350–1100 nm, peak wavelength 590 nm
Rated loading	1000 W tungsten; 1000 VA ballast; 8 A at 120 VAC / 5 A at 208–277 VAC electronic ballast
Operating levels	Turn-on below 100 lx, turn-off above 150 lx, or per client request
Consumo de energia	1.2 W static, 10 W dynamic
Ambient temperature	−40 °C a +70 °C
Related humidity	96%
Fail mode	Falha ativada
Material da concha	PC+PC, double shell
Surge protection level	6 kV / 3 kA, differential mode
Nível IP	IP54 / IP65 / IP67 depending on the ordered configuration
Configurações de fábrica	Remote control + adaptive mode
Hot swap	Datasheet describes the controller as hot-swappable; the installer still confirms whether live replacement is permitted for the exact assembly
Overall dimensions	97 mm overall height, Φ81.5 mm mounting base, 16 mm collar (dimension drawing on this page)
FCC	Marked in the datasheet
Standards listed in the datasheet	IEC 61000-4-5, -4-2, -4-3, -4-6, -4-4, -4-11; IEC 61000-3-2; GB/T 17743-2017; GB/T 2423.10-2008; UL94-V0

Model code

Code segment	Significado
JL-246CG	Base model. LTE SIM card slot is offered with this model.
06	6 kV lightning protection.
F / H / K	Enclosure colour — F = blue, H = black, K = grey.
-IP67	Ingress protection configuration.

Lead definition, from the wiring diagram

Lead colour	Função
Brown / Orange	Reserved — not used for dimming in the wiring diagram on this page
Violet	DIM+ (0–10 V+)
Pink / Gray	DIM− (0–10 V common)

Values as printed in the JL-246CG EN 2306V6 datasheet. FCC appears in the datasheet as a mark and the standard list is the datasheet criterion row; no certificate number is printed there, so this table reports the declaration rather than a certificate. The LTE bands, SIM arrangement and IP configuration must be confirmed against the destination market and the ordered part number before a project is quoted.

Instalação

A interface do produto foi projetada para ser à prova de erros; basta apertar o fotocontrolador diretamente na base giratória/fixa, conforme mostrado na Figura, no sentido horário após a inserção.

Follow the model-specific installation instructions. A qualified installer must confirm whether live replacement is permitted for the exact assembly; do not infer permission from the twist-lock interface alone.
Os usuários podem inserir as informações de identificação do fotocontrolador no sistema de gerenciamento de iluminação inteligente por meio da interface web ou escaneando o código QR com a conta pública específica do WeChat “UM9900 Smart Light Pole”.

Testes iniciais

É normal que o fotocontrolador demore alguns segundos para desligar após a instalação.
Para testar se o dispositivo está "ligado" durante o dia, cubra o olho com fita adesiva preta ou outro material opaco.
Não cubra com o dedo, pois a luz que passa pelos dedos pode ser suficiente para manter o interruptor aberto.
O teste levará aproximadamente 2 minutos.

JL-246CG Selection FAQs

What role does JL-246CG perform?

The product description identifies Zigbee and LTE communication modules, with JL-246CG acting as the gateway/collector for the Zigbee group used with JL-245CZ. Confirm the supported firmware, group configuration and management platform before deployment.

What cellular requirements must be checked?

Confirm the supported LTE bands, SIM or service plan, coverage, antenna arrangement and platform connectivity for the destination market. Do not assume that one cellular configuration works in every country or network.

Is the mounting interface sufficient to establish compatibility?

No. Confirm the ANSI C136.41 receptacle/contact arrangement, supply voltage, 0-10V driver interface, load and inrush rating, commissioning method and complete outdoor sealing configuration for the selected system.

Explore controles de iluminação inteligentes, NEMA receptacles and accessories, e selection and installation FAQs.