The photocontrol JL-401B is applicable to control the garden lighting, passage lighting and doorway lighting automatically in accordance with the ambient natural lighting level. Further, a preset 10-30 seconds time-delay might avoid redundancy operation due to spotlight or lightning during the night time.
Especificações
Características
Sensor Separated for flexible allocations inside fixture(JL-401BR only)
3~10s Time-delay preventing redundant turning-off caused byheadlights or lightning
Waterproof Lens
Especificações
Modelo nº.
JL-401B
JL-401BR
Tensão nominal
220~240 VCA
Frequência nominal
50/60Hz
Tipo de sensor
CdS photocell
Carga nominal
6A TUNGSTEN、6A Ballast
Consumo de energia
5W Max.
Níveis de operação
10~20Lx Turn-On / 25~35Lx Turn-Off
Modo de falha
Falha de desligamento
Temperatura ambiente
-40℃ ~ +70℃
Umidade relacionada
96%
Comprimento dos cabos
AWG#18,AWM1015
Proteção contra surtos
40J/1750A (MOV)
Certificações
CE.UL.ROHS
Instalação
Disconnect power, place screw thread of the photocontrol in knockout hole and fasten with rubber gasket and lock-nut. Wire according to the diagram in below. Do not install the photocontrol with the Photocell facing artificial or reflected light. This may cause the unit to cycle on and off at night.
Testes iniciais
It is normal for the SWITCH to take fewminutes to turn off when first installed.
Para testar se o dispositivo está "ligado" durante o dia, cubra o olho com um material opaco.
Não cubra com o dedo, pois a luz que passa pelos dedos pode ser suficiente para manter o interruptor aberto.
O teste levará aproximadamente 2 minutos.
* O funcionamento deste interruptor não é afetado por condições climáticas, umidade ou variações de temperatura.