JL-412C(R)
Miniature Improved Electronic Direct Wire-In Photocontrol
JL-412C

JL-412CR

Краткое описание продукта
The photocontrol JL-412C(R) is applicable to control the passage lighting and doorway lighting automatically in accordance with the ambient lighting level.
This product is designed with electronic circuits. Its quicker response with time delay of 3-10 seconds offers easy-to-test feature, while a miniature profile supports most smaller fixtures.
Further, a preset 3-10 seconds time-delay might avoid redundancy operation due to spotlight or lightning during the night time
Данный продукт внесен в список UL LLC и соответствует стандарту для непромышленных фотоэлектрических выключателей для управления освещением UL773A.
Its R version provides a separated sensor assembly.

Технические характеристики
| Модель № |
JL-412C |
JL-412CR |
| Номинальное напряжение |
120~277 В переменного тока |
| Доступный диапазон напряжений |
105~305 В переменного тока |
| Номинальная частота |
50/60Гц |
| Номинальная нагрузка |
1.2A Tungsten / Ballast |
| 1A e-Ballast |
| Потребляемая мощность |
1W Max. |
| On-off Levels |
10~30Lx Turn-On / 30~80Lx Turn-Off |
| Температура окружающей среды |
-40℃ ~ +70℃ |
| Связанная влажность |
96% |
| Длина выводов |
AWG #18, AWM1430 |
Установка
Disconnect power, place screw thread of the photocontrol in knockout hole and fasten with rubber gasket and lock-nut. Wire according to the diagram in below. Do not install the photocontrol with the Photocell facing artificial or reflected light. This may cause the unit to cycle on and off at night.

Первоначальное тестирование
При первой установке выключение SWITCH может занять несколько секунд. Это нормально.
Чтобы проверить «включение» в дневное время, закройте его глаз непрозрачным материалом.
Test will take approximately 1 minutes
Информация о заказе
JL-412C 09 R09 M
JL-412C
09
R09
M
2: lead length
09=09″
Настраиваемый
3: Sensor Position
R=sensor separated
Null=sensor on body
9=9″sensor lead length
4: M(option) =UL holographic label