Controlador Zhaga Book 18 JL-712B2 con Bluetooth Mesh, regulación de 0–10 V, detección de luz y microondas

Detalles del producto:

Controlador Zhaga Book 18 JL-712B2 con Bluetooth Mesh, regulación de 0–10 V, detección de luz y microondas

JL-712B2 Zhaga Book-18 Bluetooth Mesh light controller with 0-10V dimming

Resumen del producto

JL-712B2 is based on ZHAGA BOOK18 interface standard development of intelligent lock type light controller, using light sensing + microwave mobile combination sensor, can output 0~10V dimming signal, at the same time equipped with Bluetooth mesh communication network, can be controlled and configured through APP. The lamp controller is suitable for roads, lawns, courtyards, parks, parking lots, industrial mines and other lighting scenes. It is particularly suited to UFO high-bay luminaires fitted with a Zhaga socket.

Tabla de tallas de productos

JL-712B2 dimensions and Zhaga Book-18 mounting outline, Φ50 x 36 mm

Parámetros

JL-712B2 key parameters

JL-712B2 — transcribed from datasheet JL-712B2 EN 2305V5
Product typeZhaga Book-18 interface intelligent lock-type light controller; Bluetooth Mesh communication with 0–10 V dimming output
ModeloJL-712B2
Fuente de alimentaciónRated 12–24 VDC; rated current 40 mA
Consumo de energía< 0.6 W
Tipo de sensorLight sensor + microwave motion sensor
Rango de adquisición espectral350–1100 nm, peak wavelength 550 nm
Microwave mounting height15 m maximum
Radio de detección6–10 m at 15 m mounting height
Anti-jump delay3 s — minimum interval before the lamp can be switched on again after it switches off
Tiempo de esperaDefault 30 s, adjustable in the app
Stand-by brightnessDefault 0%, adjustable in the app
Stand-by timeDefault 5 s, adjustable in the app
Interfaz de atenuación0–10 V; accuracy ±2%
Turn-on illuminanceApp adjustable in 5 levels: daytime (any illuminance), dusk ≈60 lx, evening ≈30 lx, night ≈8.2 lx, late night ≈0 lx
Energy-saving strategyCostumbre
Mechanical vibrationIEC 60068-2-6
Flammability levelUL94-V0
Temperatura de funcionamiento−40 °C a +70 °C
Storage temperature−40 °C to +85 °C
Operating humidity5% RH to 99% RH
Protección contra la entradaIP66
DimensionesΦ50 × 36 mm
Certification marks shownCE and RoHS as printed in the datasheet mark row; the datasheet prints no certificate number or standard list

4-pin interface definition

AlfilerDefiniciónFunción
112–24 VCCPower input
2GND / DIM−Power input
3CAROLINA DEL NORTENot connected
4DIM+ (0–10 V+)Salida de señal

Values as printed in the JL-712B2 EN 2305V5 datasheet. CE and RoHS appear in the datasheet as marks only: no certificate number is printed there, so this table reports the mark rather than a certificate. Request the current declaration or certificate copy before quoting compliance in a tender or on a drawing package.

JL-712B2 parameter table from datasheet EN 2305V5

Schematic diagram of microwave induction – indoor installation at a height of 15 meters

JL-712B2 microwave detection pattern at 15 m mounting height

Características

  • 12 to 24 VDC power supply, low power consumption
  • Estándar de interfaz ZHAGA BOOK18
  • Automatic dynamic microwave frequency adjustment to avoid mutual interference in dense installation
  • Φ50*36mm size, suitable for installation in most lamps
  • 0~10V dimming interface
  • Light sensor + microwave sensor, on-demand lighting, more power saving
  • 15m hanging height
  • BLE MESH
  • La integración de voz o automatización de terceros requiere confirmar la aplicación, la pasarela, la plataforma y el servicio admitidos para la configuración seleccionada.
  • IP66

Diagrama de cableado

JL-712B2 wiring diagram with 12-24 VDC supply and 0-10V dimming output

Instalación

La interfaz del producto en sí tiene un diseño infalible, la instalación solo necesita apretar el controlador directamente a la base giratoria, como se muestra en la Figura en el sentido de las agujas del reloj después de la inserción.

JL-712B2 installation into a Zhaga Book-18 socket

Installation notes from the datasheet

  • If the negative pole of the driver’s auxiliary power supply is separate from the negative pole of the dimming interface, the two must be shorted together and connected to pin 2 (GND/DIM−) of the controller.
  • If the controller is mounted very close to the light-emitting surface of a high-power luminaire, the reflected light can exceed the compensation limit and the controller may switch the lamp off by itself.
  • A Zhaga controller cannot cut off the driver’s AC supply. Specify a driver whose minimum output current approaches 0 mA, taken from the output-current curve in the driver datasheet; otherwise the lamp may not switch off completely.
  • The controller only outputs the dimming signal to the driver. It does not switch or carry the driver and light-source load.
  • Do not cover the photosensitive window with your fingers. Light passing through a finger can prevent the lamp from switching on.

Recommended Zhaga sockets

The datasheet lists six sockets for this controller: JL-700 (general), JL-700W (without cable), JL-700S (short thread), JL-700T (pin), JL-770 (US / Z10) and JL-710 (built-in 24 VDC power supply). Socket choice follows the luminaire housing thread and whether a local 24 VDC source exists.

Preguntas frecuentes de selección del JL-712B2

¿Bluetooth Mesh significa compatibilidad con Casambi?

No. Este modelo se describe como Bluetooth Mesh con control mediante aplicación. Confirme la aplicación exacta, el firmware admitido, el método de puesta en servicio y los requisitos de la pasarela; no deduzca compatibilidad con Casambi únicamente por Bluetooth o el montaje Zhaga.

¿Puedo conectar el controlador a la red eléctrica?

La descripción especifica alimentación de 12-24 VCC y regulación de 0-10 V. Confirme la fuente de baja tensión, el cableado del zócalo y el driver LED compatible siguiendo las instrucciones del JL-712B2; no aplique tensión de red a un controlador de baja tensión.

¿Qué debe verificarse antes de implementar un proyecto?

Confirme los ajustes de detección de luz y microondas, las condiciones de montaje, la cobertura, la puesta en servicio de la malla y la documentación del conjunto IP66. La integración con plataformas de voz debe confirmarse para la aplicación, la pasarela y el servicio realmente admitidos.

Consulte controladores y componentes Zhaga, controles de iluminación inteligente, y preguntas sobre selección e instalación.

Más categorías y opciones

¡Envíanos un mensaje!

No te preocupes, nunca te enviaremos spam.

Lo último

Manual

Contáctanos

Te enviaremos lo último Manual del sistema de control de iluminación inteligente basado en la nube

Si quieres nuestro nuevo catálogo y muestra gratis, contáctanos.