JL-712B2 is based on ZHAGA BOOK18 interface standard development of intelligent lock type light controller, using light sensing + microwave mobile combination sensor, can output 0~10V dimming signal, at the same time equipped with Bluetooth mesh communication network, can be controlled and configured through APP. The lamp controller is suitable for roads, lawns, courtyards, parks, parking lots, industrial mines and other lighting scenes. It is particularly suited to UFO high-bay luminaires fitted with a Zhaga socket.
| Product type | Zhaga Book-18 interface intelligent lock-type light controller; Bluetooth Mesh communication with 0–10 V dimming output |
|---|---|
| Modello | JL-712B2 |
| Alimentazione elettrica | Rated 12–24 VDC; rated current 40 mA |
| Consumo energetico | < 0.6 W |
| Tipo di sensore | Light sensor + microwave motion sensor |
| Intervallo di acquisizione spettrale | 350–1100 nm, peak wavelength 550 nm |
| Microwave mounting height | 15 m maximum |
| Raggio di rilevamento | 6–10 m at 15 m mounting height |
| Anti-jump delay | 3 s — minimum interval before the lamp can be switched on again after it switches off |
| Tempo di attesa | Default 30 s, adjustable in the app |
| Stand-by brightness | Default 0%, adjustable in the app |
| Stand-by time | Default 5 s, adjustable in the app |
| Interfaccia di oscuramento | 0–10 V; accuracy ±2% |
| Turn-on illuminance | App adjustable in 5 levels: daytime (any illuminance), dusk ≈60 lx, evening ≈30 lx, night ≈8.2 lx, late night ≈0 lx |
| Energy-saving strategy | Costume |
| Mechanical vibration | IEC 60068-2-6 |
| Flammability level | UL94-V0 |
| Temperatura di esercizio | da −40 °C a +70 °C |
| Storage temperature | −40 °C to +85 °C |
| Operating humidity | 5% RH to 99% RH |
| Protezione dall'ingresso | IP66 |
| Dimensioni | Φ50 × 36 mm |
| Certification marks shown | CE and RoHS as printed in the datasheet mark row; the datasheet prints no certificate number or standard list |
| Spillo | Definizione | Funzione |
|---|---|---|
| 1 | 12–24 V CC | Power input |
| 2 | GND / DIM− | Power input |
| 3 | NC | Not connected |
| 4 | DIM+ (0–10 V+) | Uscita del segnale |
Values as printed in the JL-712B2 EN 2305V5 datasheet. CE and RoHS appear in the datasheet as marks only: no certificate number is printed there, so this table reports the mark rather than a certificate. Request the current declaration or certificate copy before quoting compliance in a tender or on a drawing package.
L'interfaccia del prodotto stesso è stata progettata a prova di errore, per l'installazione è sufficiente stringere il controller direttamente alla base girevole, come mostrato nella figura, in senso orario dopo l'inserimento.
The datasheet lists six sockets for this controller: JL-700 (general), JL-700W (without cable), JL-700S (short thread), JL-700T (pin), JL-770 (US / Z10) and JL-710 (built-in 24 VDC power supply). Socket choice follows the luminaire housing thread and whether a local 24 VDC source exists.
No. This model is described as Bluetooth Mesh with app control. Confirm the exact app, supported firmware, provisioning method and gateway requirements; do not infer Casambi compatibility from Bluetooth or Zhaga mounting alone.
The description specifies a 12-24VDC supply and 0-10V dimming. Confirm the low-voltage power source, socket wiring and compatible LED driver using the JL-712B2 instructions; do not apply mains voltage to a low-voltage controller.
Confirm light and microwave sensing settings, mounting conditions, detection coverage, mesh commissioning and IP66 assembly documentation. Voice-platform integration must be confirmed for the actual app, gateway and supported service.
See Zhaga controllers and components, controlli di illuminazione intelligenti, E selection and installation FAQs.
Non preoccuparti, non ti invieremo mai spam.
Ti invieremo l'ultimo manuale del sistema di controllo dell'illuminazione intelligente basato su cloud
