Photocell & Smart Lighting Control Manufacturer CHI-SWEAR
AI-generated marina power pedestal lighting application concept
AI-generated application concept. Generic equipment shown for illustration; not a customer installation, an actual CHI-SWEAR model or evidence of marine certification.

MARINA LIGHTING · OEM INTEGRATION · APPLICATION EVALUATION

Looking for a photocell for a marina power pedestal? Compact button-type, direct wire-in or swivel photocontrols can be evaluated for the pedestal’s lighting function. The right choice depends on the exact supply, LED load, enclosure opening, sensor position and coastal exposure. CHI-SWEAR supports model selection and OEM requirements review using LONG-JOIN photocontrol candidates.

Request an OEM Photocell SolutionCompare product candidates ↓

Control the pedestal light as daylight changes

A shore-power pedestal may combine utility connections with lighting that helps users see the connection area after dark. A photocontrol can switch the designated LED lighting circuit in response to ambient light, reducing the need for a routine manual dusk/dawn switch. It does not replace the pedestal’s electrical protection or power-distribution functions.

Ambient daylight
Outdoor light reaches the sensor
Photocontrol
Evaluates light level and switching logic
LED lighting circuit
Operates according to the approved design

Functional concept only — not a wiring diagram, installed project photograph or tested system configuration.

Match the control approach to the pedestal design

ApproachWhere it may fitWhat the OEM must verify
Button-type / panel-mounted wire-in controlA designed sensing opening with space behind the panelPanel thickness, thread, gasket, lead routing and service access
Swivel controlA design that needs an adjustable sensing directionInstalled envelope, orientation, clearance and sealing of the complete assembly
Central controlSeveral dock lights controlled through a shared lighting circuitSystem topology, switching duty, driver inrush, protection and maintenance strategy

Actual product candidates for an engineering review

Start with the mounting approach, then confirm the complete model and current datasheet. These existing outdoor-lighting products are evaluation candidates; they are not presented here as marine-grade-certified products or approved drop-in replacements.

LONG-JOIN JL-103 family photocontrol — actual product photograph
Actual product photograph from the CHI-SWEAR catalogue. Candidate for evaluation; no marina qualification is implied.

JL-103 family

Traditional button-type direct wire-in thermal photocontrol. Specify the complete order code; confirm the JL-103A variant against its datasheet.

Review product and request current documentation →

LONG-JOIN JL-104A photocontrol — actual product photograph
Actual product photograph from the CHI-SWEAR catalogue. Candidate for evaluation; no marina qualification is implied.

JL-104A

Swivel photocontrol candidate when the sensing direction must be adjusted. Check the mounting envelope and exact voltage version.

Review product and request current documentation →

LONG-JOIN JL-403C photocontrol — actual product photograph
Actual product photograph from the CHI-SWEAR catalogue. Candidate for evaluation; no marina qualification is implied.

JL-403C

Direct wire-in electronic photocontrol candidate for an enclosure integration review. Confirm dimensions, LED-load capability and environmental requirements.

Review product and request current documentation →

JL-103 family reference datasheet (PDF) · Technical document library

Coastal exposure needs its own validation plan

Separate enclosure water entry, internal condensation, salt-related corrosion, UV exposure and temperature changes. An IP claim for one component does not establish corrosion resistance or the rating of the complete pedestal. Define the test method, sample configuration and acceptance criteria before selecting the order code.

  • Electrical: supply range, frequency, LED-driver inrush and switching configuration.
  • Mechanical: opening, panel thickness, gasket compression, fastener arrangement and wire exit.
  • Optical: daylight access, shadows and direct or reflected light from the pedestal’s own LEDs.
  • Environmental: salt exposure, water paths, condensation, UV, temperature and any cleaning agents specified for the enclosure.

Prevent the LED from influencing its own sensor

Avoid placing the sensing window where the controlled LED, an adjacent pedestal or a reflective panel dominates the reading. Test the final enclosure at dusk, at night and at dawn. Confirm the selected model’s switching thresholds, hysteresis and delay; do not use an assumed delay to compensate for poor sensor positioning.

From application brief to approved sample

  1. Send the RFQ brief, drawing or installation photograph you are allowed to share.
  2. Review the complete candidate order code, wiring, mechanical fit and applicable documentation.
  3. Agree on a sample validation plan for the intended LED driver and assembled pedestal.
  4. Approve the configuration, inspection criteria and change-control requirements before a volume quotation is finalized.

Marina photocell questions

Can a standard outdoor photocell be used in a coastal pedestal?

Possibly, after checking the assembled design and project requirements. General outdoor use, a material description or an IP rating is not sufficient evidence of marine suitability.

Does the photocell control boat charging or shore-power protection?

This page concerns the pedestal’s lighting function. Shore-power distribution, protection and charging equipment require their own design and approvals.

Can you offer a universal replacement for an existing pedestal?

Identify the original component, supply, load, wiring, mounting and required behavior first. A similar shape or voltage marking alone does not establish interchangeability.

OEM Photocell Inquiry

Use this brief to request a technical review. Provide your company and country, application, operating voltage, estimated annual quantity in pcs, and mechanical or environmental requirements. Do not send passwords or confidential drawings without agreeing on a suitable sharing method.

State marina power pedestal, dock lighting, RV pedestal or other equipment. Include LED driver/load, mounting space and environmental test requirements.
Include the full model if known, supply voltage/frequency, sample quantity and target schedule.

Email the marina OEM team · Alternative contact form

Explore the buying guides

About this application resource

CHI-SWEAR is the technical and international sales portal in the LONG-JOIN brand network. Product links on this page lead to our own catalogue. Third-party pedestal literature is used only to explain the application context. No marina installation history, salt-spray lifetime or energy-saving percentage is claimed for these candidate products.

Application reference: Eaton Lighthouse power pedestal — manufacturer product information. This independent industry example demonstrates an application, not a CHI-SWEAR customer relationship, endorsement or product compatibility claim.

A photocontrol in this application controls a lighting circuit. It is not a shore-power charger, protective device or certification of the complete pedestal. Integration and testing must be reviewed by the equipment manufacturer and qualified electrical personnel.

The Latest

Manual

Contact us

We will send you the latest cloud-based smart lighting control system manual

If you want our new catalog and free sample , contact us